As a fundamental fastener for asphalt shingle roofing, the Huttig-Grip 1-1/2″ Coil Roofing Nail – EG Smooth Shank (7.2M) provides the essential length and performance for securing shingles to standard roof decks. Available in convenient 7.2M (7,200 count) bulk boxes from A1A Wholesale Supply, these nails are designed for efficient high-volume installation with standard 15-degree pneumatic coil roofing nailers, helping roofing contractors increase productivity on the job site.
The 1-1/2 inch length is a widely accepted standard for fastening asphalt shingles, providing sufficient penetration into the typical wood roof sheathing to meet most building code requirements for standard applications. The smooth shank allows for easy and rapid driving with pneumatic nailers, contributing to faster installation times.
These coil roofing nails feature an Electro-Galvanized (EG) finish. This process applies a layer of zinc to the steel nail, providing basic protection against rust and corrosion. The EG finish is suitable for general exterior roofing applications in moderate climates where the nails are not subjected to prolonged exposure to moisture, salt spray, or aggressive environmental conditions. It is important to note that for roofing on or near saltwater, in high-humidity regions, or when fastening into treated lumber (such as ACQ), fasteners with enhanced corrosion resistance like Hot-Dip Galvanized or Stainless Steel are recommended.
Huttig-Grip is a nationally recognized brand committed to delivering quality and value in construction fasteners. These 1-1/2″ Coil Roofing Nails are manufactured with a typical shank diameter of .120 inches (11 gauge) and feature a large full round head (approximately 3/8″ in diameter). This generous head size provides a substantial bearing surface against the shingle, helping to prevent pull-through and ensuring the roofing material is securely fastened. The 15-degree wire coil collation is the standard format for most pneumatic roofing nailers, ensuring consistent and reliable feeding without jams.
By choosing Huttig-Grip 1-1/2″ Coil Roofing Nails – EG Smooth Shank (7.2M) from A1A Wholesale Supply, roofing contractors can rely on a standard, high-volume fastener for their asphalt shingle installations. These nails offer efficient pneumatic application, appropriate length for typical decks, a smooth shank for easy driving, and an Electro-Galvanized finish for basic corrosion resistance, all backed by the trusted Huttig-Grip brand in a cost-effective 7.2M package.
- Product Name: Huttig-Grip 1-1/2″ Coil Roofing Nails – EG Smooth Shank (7.2M)
- Brand: Huttig-Grip
- Type: Roofing Nails, Coil Roofing Nails, Collated Roofing Nails, EG Nails, Electro-Galvanized Nails, Smooth Shank Nails, Bulk Roofing Nails, Coil Nails, 15 Degree Coil Nails
- Dimensions: 1-1/2″ Length, typically .120″ Shank Diameter (11 Gauge)
- Shank Type: Smooth Shank
- Collation: 15 Degree Wire Coil
- Finish: Electro-Galvanized (EG)
- Head Type: Large Full Round Head (typically around 3/8″ diameter)
- Quantity: 7,200 Count per box (7.2M)
- Material: Steel with Electro-Galvanized Coating
- Function: Provides efficient and secure fastening for asphalt shingles to standard wood roof decks using pneumatic coil nailers.
- Uses: Fastening asphalt shingles and fiberglass shingles to wood roof decks in general exterior applications in moderate climates. Suitable for typical sheathing thicknesses. Not recommended for treated lumber or harsh/coastal environments.
- Compatible Tools: 15-degree pneumatic coil roofing nailers.
- Packaging: Available in 7.2M (7,200 count) Boxes.
- Properties: Standard length for typical roof decks, Easy driving (smooth shank), Basic corrosion resistance (EG), Standard collation for pneumatic tools, Prevents pull-through (large head), Bulk quantity for large jobs.
- Benefits: Efficient and fast installation, Suitable for most common asphalt shingle applications, Cost-effective bulk packaging, Reliable performance in moderate environments.
