Elevate the security of your asphalt shingle roofing installations with Huttig-Grip 1-1/2″ Coil Roofing Nails – EG Ring Shank (7.2M). Available in cost-effective 7.2M (7,200 count) bulk boxes from A1A Wholesale Supply, these nails are engineered for rapid and reliable application using standard 15-degree pneumatic coil roofing nailers, combining efficiency with enhanced performance.

The 1-1/2 inch length is a widely utilized standard, providing optimal penetration into typical wood roof sheathing to meet or exceed most building code requirements for securing asphalt shingles. What sets this fastener apart is the ring shank. Unlike smooth shank nails, the ring shank features a series of annular threads that create a powerful friction hold within the wood fibers. This significantly increases withdrawal resistance, providing superior protection against wind uplift and ensuring shingles remain firmly in place, especially important in areas prone to moderate winds.

These coil roofing nails are finished with an Electro-Galvanized (EG) coating. This process applies a layer of zinc to the steel, offering basic protection against rust and corrosion for exterior applications in moderate climates. While suitable for many common roofing projects, it is crucial to note that the EG finish has limitations in harsh environments, such as coastal regions with salt spray or areas with high humidity, and is not recommended for use with chemically treated lumber (like ACQ) due to potential corrosive reactions. For these demanding conditions, Hot-Dip Galvanized or Stainless Steel fasteners are the preferred choice.

Huttig-Grip is a trusted national brand known for providing durable and dependable fasteners for the construction industry. These 1-1/2″ Coil Roofing Nails are manufactured with a standard .120 inch shank diameter (11 gauge) and feature a large full round head (typically around 3/8″ in diameter). This substantial head provides a large bearing surface, which helps to prevent shingles from tearing or pulling over the nail head, contributing to a more secure and long-lasting roof assembly. The 15-degree wire coil collation ensures smooth and consistent feeding through compatible pneumatic nailers, minimizing frustrating jams and maximizing productivity on the job site.

By choosing Huttig-Grip 1-1/2″ Coil Roofing Nails – EG Ring Shank (7.2M) from A1A Wholesale Supply, roofing contractors gain access to a high-volume, pneumatic fastener that provides the enhanced holding power of a ring shank and the basic corrosion resistance of an EG finish, all in a standard 1-1/2″ length ideal for typical asphalt shingle applications. Rely on Huttig-Grip for quality fasteners that contribute to a secure and durable roof.

• Product Name: Huttig-Grip 1-1/2″ Coil Roofing Nails – EG Ring Shank (7.2M)
• Brand: Huttig-Grip
• Type: Roofing Nails, Coil Roofing Nails, Collated Roofing Nails, EG Nails, Electro-Galvanized Nails, Ring Shank Nails, Bulk Roofing Nails, Coil Nails, 15 Degree Coil Nails, High Wind Resistance Nails
• Dimensions: 1-1/2″ Length, typically .120″ Shank Diameter (11 Gauge)
• Shank Type: Ring Shank (Annular Thread)
• Collation: 15 Degree Wire Coil
• Finish: Electro-Galvanized (EG)
• Head Type: Large Full Round Head (typically around 3/8″ diameter)
• Quantity: 7,200 Count per box (7.2M)
• Material: Steel with Electro-Galvanized Coating
• Function: Provides efficient and highly secure fastening for asphalt shingles to wood roof decks using pneumatic coil nailers, with significantly enhanced withdrawal resistance.
• Uses: Fastening asphalt shingles and fiberglass shingles to wood roof decks in general exterior applications in moderate climates. Recommended when enhanced holding power is desired compared to smooth shank nails. Suitable for typical sheathing thicknesses. Not recommended for treated lumber or harsh/coastal environments.
• Compatible Tools: 15-degree pneumatic coil roofing nailers.
• Packaging: Available in 7.2M (7,200 count) Boxes.
• Properties: Standard length for typical roof decks, Enhanced holding power (ring shank), Basic corrosion resistance (EG), Standard collation for pneumatic tools, Prevents pull-through (large head), Bulk quantity for large jobs, Improved wind resistance.
• Benefits: Faster and more secure installation, Reduced risk of shingle blow-off, Suitable for many common asphalt shingle applications, Cost-effective bulk packaging, Reliable performance in moderate environments.