Selecting the right fastener is critical for the longevity and performance of a roofing system, especially in harsh environments. 1-1/4″ Stainless Steel Ring Shank Coil Roofing Nails (7,200 Count), available through A1A Wholesale Supply, offer a premium fastening solution that stands up to the challenge. These nails combine the superior corrosion resistance of stainless steel with the enhanced holding power of a ring shank, all in a convenient coil format for efficient pneumatic installation.

The 1-1/4 inch length of these roofing nails is a common size, suitable for fastening asphalt shingles to various roof decking thicknesses, particularly for thinner sheathing (like 1/2″ plywood or OSB) or specific shingle types where a shorter nail length is appropriate. The ring shank (annular thread) design features a series of circular rings along the nail’s shank, which significantly increases the nail’s grip and withdrawal resistance in the wood substrate. This is a key feature for enhancing wind uplift resistance and ensuring shingles remain securely fastened over the life of the roof, offering superior holding power compared to smooth shank nails.

Constructed from Stainless Steel (SS), these nails provide exceptional resistance to rust and corrosion compared to galvanized alternatives. Type 304 Stainless Steel offers high corrosion resistance suitable for general outdoor applications, including humid environments. For ultimate corrosion resistance, particularly in coastal areas with salt spray exposure or when fastening certain types of wood like cedar, redwood, or ACQ treated lumber, Type 316 Stainless Steel is often the preferred choice and may be required by local building codes. These stainless steel nails help prevent unsightly rust stains on the roof surface and ensure the integrity of the fastening point even in challenging conditions.

These roofing nails are coil collated, typically with a 15-degree wire collation, making them compatible with most pneumatic coil roofing nailers from leading manufacturers. This allows for rapid, repetitive fastening, significantly increasing installation speed and efficiency on the job site. Each nail commonly features a 0.120-inch shank diameter (approximately 11 or 12 gauge) and a full round head or large flat head (around 3/8″ diameter) designed to provide ample bearing surface to hold down the roofing material without puncturing or pulling through.

Common applications for these nails include fastening asphalt shingles, roofing felt, underlayment, and other sheet goods to wood roof decks where a 1-1/4″ length is appropriate. They are especially valuable in environments where corrosion is a significant concern.

Supplied in a large box containing 7,200 nails (7.2M), this quantity is suitable for completing a significant portion of a roofing project, minimizing the need for frequent restocking. The nails are typically organized into multiple smaller coils within the box for easy handling and loading into the nailer.

While specific offerings may vary, Master Fasteners is a brand that provides a range of quality fastening solutions for construction professionals, including various types of roofing nails. This offering of 1-1/4″ Stainless Steel Ring Shank Coil Roofing Nails in a 7,200 count box represents a premium, high-performance fastener essential for roofing contractors working on projects where durability, corrosion resistance, and superior holding power are critical requirements, particularly when a 1-1/4″ length is needed. By choosing 1-1/4″ Stainless Steel Ring Shank Coil Roofing Nails (7,200 Count) from A1A Wholesale Supply, roofing contractors can ensure they are using a top-tier fastener for a secure and long-lasting roofing installation, especially in demanding environments.

• Product Name: 1-1/4″ Stainless Steel Ring Shank Coil Roofing Nails (7,200 Count)
• Brand: Master Fasteners
• Type: Roofing Nails, Coil Nails, Stainless Steel Nails, Ring Shank Nails, Fasteners, Coil Roofing Nails
• Length: 1-1/4 inches (Often referred to as 3d)
• Shank Type: Ring Shank (Annular Thread)
• Material: Stainless Steel (SS), typically 304 or 316 Grade.
• Collation: Coil, typically 15-degree wire collation.
• Quantity: 7,200 nails per box (7.2M).
• Shank Diameter: 0.120 inches (Approx. 11 or 12 gauge).
• Head Type: Full Round Head or Large Flat Head (Approx. 3/8″ diameter).
• Compatible Tools: 15-degree pneumatic coil roofing nailers.
• Function: Securely fastens roofing materials to the roof deck; resists pull-through and withdrawal.
• Uses: Installation of asphalt shingles, roofing felt, underlayment, and other roofing materials, especially on thinner decking or where 1-1/4″ length is suitable, and in coastal areas and corrosive environments.
• Properties: Superior Corrosion Resistance (Stainless Steel), Excellent Holding Power (Ring Shank), Fast Installation ( Coil Collation), Durable, Standard Length and Diameter for Roofing.
• Benefits: Prevents rust stains and nail corrosion, Enhanced wind resistance, Long-lasting performance in harsh environments, Increased installation efficiency, Meets building code requirements in corrosive areas, Suitable for thinner decking applications.