Efficient and effective fastening is key to productive roofing operations. 1-3/4″ Electro-Galvanized Coil Roofing Nails (7,200 Count), available through A1A Wholesale Supply, are a staple fastener for roofing contractors. These nails are designed for rapid, consistent performance when used with pneumatic coil roofing nailers, making them an excellent choice for a wide variety of asphalt shingle installations.

The 1-3/4 inch length of these roofing nails is a standard and widely accepted size for fastening asphalt shingles to common roof decking materials such as plywood or OSB, ensuring proper penetration for secure attachment. Most often, these EG coil roofing nails feature a smooth shank, which allows for easy and rapid driving, contributing to high installation speeds.

A key characteristic of these nails is their Electro-Galvanized (EG) finish. This process applies a thin layer of zinc to the nail’s surface, providing basic corrosion resistance. While not as robust as hot-dip galvanization (HDG) or stainless steel, EG coatings are typically sufficient for many standard exterior applications, particularly in mild to moderate weather conditions where the nails are largely covered by roofing materials. They are suitable for environments where local building codes allow for electro-galvanized fasteners.

These roofing nails are coil collated, typically with a 15-degree wire collation. This format is specifically engineered for use with most pneumatic coil roofing nailers from major brands, enabling contractors to efficiently fasten large quantities of materials without frequent reloading. Each nail is manufactured with a common 0.120-inch shank diameter (approximately 11 or 12 gauge), providing adequate strength, and a full round head or large flat head (around 3/8″ diameter) that provides ample bearing surface to securely hold down roofing materials.

Common applications for these nails include the installation of asphalt shingles, roofing felt (underlayment), and other non-structural roofing components to wood roof decks. They are a practical choice for general roofing work where extreme corrosion resistance from salt spray or harsh chemicals is not a primary concern.

Supplied in a substantial box containing 7,200 nails (7.2M), this quantity is designed to support significant portions of roofing projects, ensuring contractors have a steady supply of fasteners and minimizing downtime for material reordering. The nails are conveniently organized into multiple smaller coils within the box for easy handling and loading into nailer magazines.

While specific offerings may vary, Master Fasteners is a brand that provides a range of quality fastening solutions for construction professionals, including various types of roofing nails. This offering of 1-3/4″ Electro-Galvanized Coil Roofing Nails in a 7,200 count box represents a fundamental, efficient, and cost-effective fastener for roofing contractors for a wide range of standard roofing applications. By choosing 1-3/4″ Electro-Galvanized Coil Roofing Nails (7,200 Count) from A1A Wholesale Supply, roofing contractors can access a reliable and high-volume fastener essential for productive and successful roofing installations.

• Product Name: 1-3/4″ Electro-Galvanized Coil Roofing Nails (7,200 Count)
• Brand: Master Fasteners
• Type: Roofing Nails, Coil Roofing Nails, EG Roofing Nails, Electro-Galvanized Nails, Galvanized Roofing Nails, Smooth Shank Roofing Nails (most common for EG), Fasteners
• Length: 1-3/4 inches (Often referred to as 5d)
• Shank Type: Smooth Shank (commonly, unless specified otherwise)
• Finish: Electro-Galvanized (EG), providing basic corrosion resistance.
• Collation: Coil, typically 15-degree wire collation.
• Quantity: 7,200 nails per box (7.2M).
• Shank Diameter: 0.120 inches (Approx. 11 or 12 gauge).
• Head Type: Full Round Head or Large Flat Head (Approx. 3/8″ diameter).
• Compatible Tools: 15-degree pneumatic coil roofing nailers.
• Function: Securely fastens roofing materials to the roof deck.
• Uses: Installation of asphalt shingles, roofing felt, underlayment, and other roofing materials for general purpose applications.
• Properties: Basic Corrosion Resistance (EG), Easy to Drive (Smooth Shank), Fast Installation (Coil Collation), Standard Length and Diameter for Roofing, Cost-Effective.
• Benefits: Enables rapid and efficient roofing installation, Provides reliable fastening for common asphalt shingle applications, Economical choice for projects where basic corrosion resistance is sufficient, Commonly used and readily available.