When your roofing project involves fastening through thicker layers of material or requires a longer nail length to meet specific building code requirements, Huttig-Grip 1-3/4″ Coil Roofing Nails – EG Smooth Shank (7.2M) are an excellent choice. Available in high-volume 7.2M (7,200 count) boxes from A1A Wholesale Supply, these nails are designed for efficient use with standard 15-degree pneumatic coil roofing nailers, making them ideal for large-scale roofing jobs.
These roofing nails feature a 1-3/4 inch length, which provides extended penetration into the roof deck, crucial when fastening through materials such as rigid insulation board, multiple layers of roofing felt, or thicker shingle products. The smooth shank allows for easy and rapid driving with pneumatic tools, contributing to faster installation times on the job site.
The Electro-Galvanized (EG) finish provides a basic level of corrosion resistance, making these nails suitable for general exterior roofing applications in moderate climates. This finish protects the steel from rust and corrosion under normal weather conditions. However, it’s important to note that the EG finish is not recommended for use with treated lumber (such as ACQ) or in harsh environments exposed to salt spray, high humidity, or industrial pollutants, as these conditions can lead to premature fastener degradation. For such demanding applications, hot-dip galvanized or stainless steel fasteners are recommended.
Huttig-Grip is a trusted national brand known for supplying quality fasteners to the construction industry. These 1-3/4″ Coil Roofing Nails have a typical shank diameter of .120 inches (11 gauge) and a large full round head (approximately 3/8″ in diameter), providing a sufficient bearing surface to minimize pull-through of roofing materials during installation and throughout the life of the roof. The 15-degree wire coil collation ensures smooth and consistent feeding through compatible pneumatic nail guns, reducing frustrating jams and increasing productivity.
By choosing Huttig-Grip 1-3/4″ Coil Roofing Nails – EG Smooth Shank (7.2M) from A1A Wholesale Supply, roofing contractors can efficiently fasten through thicker roofing systems using their pneumatic tools, with the confidence that comes from using a reliable brand and a standard fastener designed for general exterior applications in moderate climates.
- Product Name: Huttig-Grip 1-3/4″ Coil Roofing Nails – EG Smooth Shank (7.2M)
- Brand: Huttig-Grip
- Type: Roofing Nails, Coil Roofing Nails, Collated Roofing Nails, EG Nails, Electro-Galvanized Nails, Smooth Shank Nails, Bulk Roofing Nails, Coil Nails, 15 Degree Coil Nails
- Dimensions: 1-3/4″ Length, typically .120″ Shank Diameter (11 Gauge)
- Shank Type: Smooth Shank
- Collation: 15 Degree Wire Coil
- Finish: Electro-Galvanized (EG)
- Head Type: Large Full Round Head (typically around 3/8″ diameter)
- Quantity: 7,200 Count per box (7.2M)
- Material: Steel with Electro-Galvanized Coating
- Function: Provides efficient fastening for asphalt shingles and other roofing materials, especially through thicker substrates, using pneumatic coil nailers.
- Uses: Fastening asphalt shingles, fiberglass shingles, roofing felt, insulation board, and other roofing materials to wood decks in moderate climates. Suitable for applications requiring longer nail penetration. Not recommended for treated lumber or harsh/coastal environments.
- Compatible Tools: 15-degree pneumatic coil roofing nailers.
- Packaging: Available in 7.2M (7,200 count) Boxes.
- Properties: Longer length for thicker applications, Easy to drive (smooth shank), Basic corrosion resistance (EG), Standard collation for pneumatic tools, Prevents pull-through (large head), Bulk quantity for large jobs.
- Benefits: Efficient installation on various roofing systems, Suitable for specific code requirements regarding nail length, Reliable performance in moderate exterior conditions, Economical bulk packaging.
