A secure and weather-resistant roof relies on quality fasteners that can withstand the elements. 1-3/4″ Hot Dip Galvanized Smooth Shank Coil Roofing Nails (7,200 Count), available through A1A Wholesale Supply, are a standard and widely used fastener for asphalt shingle roofing and other related applications. These nails are designed for efficiency and performance in typical residential and commercial roofing projects where this size and finish are suitable.
The 1-3/4 inch length of these roofing nails makes them particularly well-suited for fastening asphalt shingles to common roof decking thicknesses, ensuring proper penetration and secure attachment. The smooth shank design allows for easy and fast driving with pneumatic nail guns, contributing to highly efficient installation without excessive friction.
A key feature of these nails is the Hot Dip Galvanized (HDG) finish. This robust process involves coating the steel nails by dipping them in molten zinc, resulting in a thick, uniform, and highly durable protective layer. This provides good corrosion resistance against rust and deterioration caused by exposure to rain, humidity, and other environmental factors. Hot Dip Galvanization commonly meets rigorous industry standards such as ASTM A153 and provides a G90 coating weight, which are frequently specified by building codes for fasteners used in exposed outdoor environments to ensure long-term performance and prevent rust stains on the roof surface. While stainless steel offers superior resistance for extreme coastal or chemical exposures, HDG provides a strong and reliable solution for many typical outdoor conditions.
These roofing nails are coil collated, typically with a 15-degree wire collation. This format is specifically designed for use with most pneumatic coil roofing nailers from major brands, enabling contractors to efficiently fasten large quantities of materials without frequent reloading. Each nail is manufactured with a common 0.120-inch shank diameter (approximately 11 or 12 gauge), providing adequate strength for driving and holding, and a full round head or large flat head (around 3/8″ diameter) that provides ample bearing surface to securely hold down roofing materials without pulling through.
Common applications for these nails include the installation of asphalt shingles, roofing felt (underlayment), and other sheet goods to wood roof decks. They are a practical choice for general roofing work where a good balance of corrosion protection and cost-effectiveness is desired, and where local codes do not mandate enhanced withdrawal resistance from a ring shank.
Supplied in a substantial box containing 7,200 nails (7.2M), this quantity is well-suited for tackling significant roofing areas, ensuring contractors have an ample supply on hand to maintain workflow. The nails are typically organized into multiple smaller coils within the box for convenient handling and loading into nailer magazines.
While specific offerings may vary, Master Fasteners is a brand that provides a range of quality fastening solutions for construction professionals, including various types of roofing nails. This offering of 1-3/4″ Hot Dip Galvanized Smooth Shank Coil Roofing Nails in a 7,200 count box represents a reliable, standard, and widely used fastener for roofing contractors seeking good corrosion resistance and efficient installation for typical roofing projects. By choosing 1-3/4″ Hot Dip Galvanized Smooth Shank Coil Roofing Nails (7,200 Count) from A1A Wholesale Supply, roofing contractors can access a fundamental and dependable fastener that provides good protection and performance for their roofing installations.
- Product Name: 1-3/4″ Hot Dip Galvanized Smooth Shank Coil Roofing Nails (7,200 Count)
- Brand: Master Fasteners
- Type: Roofing Nails, Coil Roofing Nails, HDG Roofing Nails, Galvanized Roofing Nails, Smooth Shank Roofing Nails, Fasteners, Coil Nails
- Length: 1-3/4 inches (Often referred to as 5d)
- Shank Type: Smooth Shank
- Finish: Hot Dip Galvanized (HDG), typically meeting ASTM A153 / G90 standards for superior corrosion resistance.
- Collation: Coil, typically 15-degree wire collation.
- Quantity: 7,200 nails per box (7.2M).
- Shank Diameter: 0.120 inches (Approx. 11 or 12 gauge).
- Head Type: Full Round Head or Large Flat Head (Approx. 3/8″ diameter).
- Compatible Tools: 15-degree pneumatic coil roofing nailers.
- Function: Securely fastens roofing materials to the roof deck.
- Uses: Installation of asphalt shingles, roofing felt, underlayment, and other roofing materials on typical decking; suitable for general exterior roofing applications where HDG is required or desired.
- Properties: Good Corrosion Resistance (HDG), Easy to Drive (Smooth Shank), Fast Installation (Coil Collation), Durable, Standard Length and Diameter for Roofing, Meets many building code requirements for exterior fasteners.
- Benefits: Protects against rust and corrosion in typical outdoor environments, Efficient and fast installation with pneumatic nail guns, Reliable fastening for standard roofing applications, Commonly used and readily available, Cost-effective for its level of corrosion protection.
