For precise placement and reliable fastening in roofing applications, especially for repairs, intricate areas, or when pneumatic nailers are not feasible, hand-driven nails are indispensable. 1-3/4″ Electro-Galvanized Smooth Shank Roofing Nails, available in bulk 50 lb. boxes from A1A Wholesale Supply, are a trusted choice for roofing contractors. These nails combine ease of hand installation with essential durability for a wide range of standard roofing projects.
The 1-3/4 inch length of these roofing nails is a widely accepted and very common size for securely fastening asphalt shingles to typical roof decking materials such as plywood or OSB, ensuring proper penetration. The smooth shank design of these nails facilitates easy and consistent driving when installed by hand, making them user-friendly and reducing effort during installation.
A key characteristic of these nails is their Electro-Galvanized (EG) finish. This process applies a thin, protective layer of zinc to the nail’s surface, offering basic corrosion resistance. While not as robust as hot-dip galvanization (HDG) for severe conditions or treated lumber, EG coatings are typically sufficient for many standard exterior applications, particularly in mild to moderate weather conditions where the nails are largely covered and protected by the roofing materials. They are a practical and economical choice, often complying with local building codes for general roofing work.
Each nail is manufactured with a standard 0.120-inch shank diameter (approximately 11 or 12 gauge), providing ample strength for both driving and holding power. They feature a full round head or large flat head (typically around 3/8″ diameter), which provides sufficient bearing surface to effectively secure roofing materials without tearing or pull-through.
Common applications for these nails include the installation of asphalt shingles, roofing felt (underlayment), and other non-structural roofing components to wood roof decks. They are particularly useful for small repairs, finishing around vents or skylights, or any situation where a hand-driven solution is preferred.
Supplied in bulk 50 lb. boxes, these loose nails are an economical choice for contractors, providing a large quantity for significant jobs while minimizing packaging waste and ensuring a ready supply. QuickBuild is a brand known for providing a range of reliable fastening solutions trusted by construction professionals for efficiency and performance in diverse building applications.
By choosing 1-3/4″ Electro-Galvanized Smooth Shank Roofing Nails (Hand Drive) from A1A Wholesale Supply, roofing contractors can ensure precise, secure, and cost-effective installations for all their hand-nailing roofing needs.
Product Details:
- Length: 1-3/4 inches
- Shank Type: Smooth Shank
- Finish/Coating: Electro-Galvanized (EG)
- Provides basic corrosion resistance for covered exterior applications.
- Application Method: Hand Drive (Loose/Bulk)
- Quantity: 50 lb. bulk box (Approx. 9,000-10,000 nails, depending on manufacturer specifics)
- Shank Diameter: Standard, typically around 0.120 inches (Approx. 11-12 Gauge)
- Head Type: Full Round Head / Large Flat Head (Approx. 3/8″ diameter)
- Compatible Tools: Hammer
- Primary Uses: Hand nailing asphalt shingles, roofing felt, underlayment, and other roofing materials to wood roof decks. Ideal for repairs, intricate areas, and general hand applications.
- Corrosion Resistance: Basic (EG), suitable for standard exterior applications where nails are covered.
- Key Benefits: Easy to drive by hand, cost-effective bulk packaging, reliable fastening for traditional installation methods.
