For roofing contractors and builders needing a versatile, non-fibered asphalt coating for moisture prevention and surface protection, Del-Val 111 Non-Fibered Roof Coating from United Asphalt provides a reliable solution. This coating is formulated as a non-fibered asphalt product that, when applied, forms a smooth, flexible shell. This shell effectively helps resist the entrance of moisture, providing essential protection for the underlying surfaces. Del-Val 111 boasts excellent adhesion to most roof surfaces and other compatible substrates.
The uses for Del-Val 111 extend beyond just roofing. It is commonly used for coating all types of smooth surface asphalt roofs. Additionally, it is suitable for exterior below-grade masonry and block walls where no hydrostatic pressure is present, acting as a dampproofing layer. It can also be used to protect wood and metal surfaces, whether they are located above or below-grade.
Proper preparation is crucial for good adhesion; all surfaces must be clean and free of any oil, grease, dirt, and all other foreign matter. The coating must be stirred thoroughly before using. Del-Val 111 can be easily applied using a brush, roller, or heavy-duty spray equipment. Apply approximately 1–2 gallons per square (100 sq ft) per coat, with coverage varying based on the surface condition. When used for backfilling against foundation walls, allow 24 hours of drying time. Do not apply over wet/damp or frost covered surfaces, as this will interfere with performance. This product meets or exceeds the requirements of both ASTM D449-83 Type I (for asphalt used in dampproofing and waterproofing) and ASTM D-4479 Type I (for asphalt-based, non-fibered coatings for roofing and waterproofing), confirming its suitability for its intended applications. Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits. Choose Del-Val 111 Non-Fibered Roof Coating from A1A Wholesale Supply for a versatile, non-fibered asphalt coating solution for various protection needs nationwide.
- Product Name: Del-Val 111 Non-Fibered Roof Coating
- Brand: United Asphalt
- Type: Non-Fibered Asphalt Coating, Protective Coating, Waterproofing Coating, Dampproofing Coating
- Composition: Non-fibered asphalt coating
- Key Properties: Non-Fibered, Asphalt-based, Smooth Flexible Shell, Resists Moisture Entrance, Excellent Adhesion.
- Uses/Compatible Substrates: Coating all types of smooth surface asphalt roofs; exterior below-grade masonry and block walls (where no hydrostatic pressure is present); protect wood and metal (above or below-grade).
- Preparation: Surface must be clean (free of oil, grease, dirt, foreign matter); must stir before using.
- Application: Brush, roller or heavy duty spray equipment; apply per coat; avoid wet/damp or frost covered surfaces; allow 24 hrs drying before backfilling (for foundation walls).
- Coverage: Approximately 1–2 gallons per square (100 sq ft) per coat (Coverage may vary).
- Cleanup: Del-Val Orange Cleaner & Degreaser or mineral spirits.
- Code Approvals / Compliance: Meets or exceeds ASTM D449-83 Type I & ASTM D-4479 Type I.
- Function: Prevents moisture penetration and protects smooth asphalt roofs, below-grade walls (no hydrostatic pressure), wood, and metal surfaces with a flexible asphalt shell.
