For roofing contractors and builders seeking a versatile, water-based asphalt emulsion coating with reinforcing fibers, Del-Val 120 Fibered Emulsion Coating from United Asphalt provides a reliable solution for both roof protection and damp-proofing applications. This coating is a fiber reinforced asphalt based clay emulsion, designed for ease of application by both brush and spray methods, as well as with a squeegee.
Del-Val 120 offers excellent resistance to water, forming a protective barrier that helps prevent moisture penetration. When it cures, it dries to a tough, durable finish capable of withstanding the elements. A significant advantage of this product is its water-based nature, which allows for easy cleanup of tools with just warm water and soap.
The uses for Del-Val 120 are broad. It can be applied to smooth surfaces of Built Up Roofs (BUR), APP and SBS bituminous membranes, metal surfaces, and roll-roofing to provide a protective layer. Additionally, it is highly effective for damp-proofing above- and below-grade foundation walls and masonry surfaces, helping to prevent moisture from migrating through these structures.
Proper preparation is necessary; all surfaces must be clean and free of any oil, grease, dirt, and all other foreign matter. Repair all holes, cracks, blisters, tears, or breaks in roof surfaces beforehand by spreading Del-Val 211 Flashing Cement over the damaged area and then embedding United Asphalt Cotton or Fiberglass Fabric. The coating must be stirred before using. Apply Del-Val 120 to a clean surface using a brush, squeegee, or heavy-duty spray equipment. For best results, weather should be clear with no threat of rain for 48 hours after application, allowing sufficient time for the emulsion to break and cure properly. Apply at the rate of approximately 3 gallons per square (100 sq ft) per coat, with coverage varying based on the surface. This product meets or exceeds the requirements of ASTM D 1227-87 Type IV, confirming its quality and suitability as a fibered asphalt emulsion coating for roofing and damp-proofing. Choose Del-Val 120 Fibered Emulsion Coating from A1A Wholesale Supply for a versatile, water-based, fibered asphalt solution for various protection needs nationwide.
- Product Name: Del-Val 120 Fibered Emulsion Coating
- Brand: United Asphalt
- Type: Fibered Emulsion Coating, Asphalt Emulsion Coating, Clay Emulsion Coating, Water-Based Asphalt Coating, Protective Coating, Damp-proofing Coating
- Composition: Fiber reinforced asphalt based clay emulsion
- Key Properties: Fibered, Asphalt Emulsion, Clay Emulsion, Water-Based Cleanup (warm water and soap), Excellent Resistance to Water, Cures to Tough Durable Finish.
- Uses/Compatible Substrates: Smooth surfaces Built Up Roofs (BUR), APP bituminous membranes, SBS, metal surfaces, roll-roofing; Damp-proofing above- and below-grade foundation walls and masonry surfaces.
- Preparation: Clean surface (free of oil, grease, dirt, foreign matter); repair roof damage (Del-Val 211 + fabric); must stir.
- Application: Apply to a clean surface using brush, squeegee, or heavy duty spray equipment; avoid threat of rain for 48 hours.
- Coverage: Approximately 3 gallons per square (100 sq ft) per coat (Coverage may vary).
- Cleanup: Clean tools with warm water and soap.
- Code Approvals / Compliance: Meets or exceeds ASTM D 1227-87 Type IV.
- Function: Prevents moisture penetration and protects smooth asphaltic/metal roofs and damp-proofs foundation walls/masonry with a fibered asphalt emulsion that cures to a tough finish and allows for water-based cleanup.
