The Protecto Speed Splash from A1A Wholesale Supply redefines backsplash tile installation, offering a revolutionary peel & stick method that eliminates the mess and cure time associated with traditional thin-set mortars. This innovative product is a double-sided adhesive tile mat that provides a strong, instant bond for a variety of tile types.

Key Features and Benefits for Contractors:

• Primer-less Peel & Stick: No primer or messy mortar/adhesive required, significantly speeding up installation.
• Time-Saving: Reduces project time by eliminating mixing, spreading, and drying time of traditional adhesives.
• Clean Installation: No mortar means less mess and easier cleanup.
• Versatile Substrate Adhesion: Adheres to sealed drywall, plywood, concrete, painted surfaces, laminates, and existing tiles.
• Immediate Grouting: Tiles can be grouted on the same day of installation.
• Wide Tile Compatibility: Safe for use with ceramic, porcelain, and stone tile (refer to limitations for maximum size/weight).
• Easy to Use: Features a split release liner for convenient application.

Uses:

• Designed to adhere backsplash tiles to:
  • Sealed drywall
  • Plywood
  • Concrete
  • Painted surfaces
  • Laminates
  • Existing tiles

Limitations:

• Not recommended for tile exceeding 12″×12″ (30.48 cm x 30.48 cm) or weighing more than 1 lb. (0.45 kg) per square foot.
• Not recommended for floors, countertops, or in areas with direct water contact (e.g., showers, tub surrounds).
• Not for use with unglazed tile or tiles that require a rough, porous surface to bond.
• Requires a minimum slope of 1/2′′ per foot for roof/gutter applications (though the document primarily focuses on backsplash).
• Not for use in areas of ponding water.

Installation Directions (Backsplash):

1. Preparation: Ensure surfaces are clean, dry, sound, and free of dirt, dust, or foreign materials.
2. Application:
   • Cut the Speed Splash roll into easily handled lengths.
   • Peel back approximately 3″ to 6″ of the release liner from the side to be adhered to the substrate.
   • Carefully align and position the Speed Splash. Apply firm pressure with a hand roller to ensure full contact and a good bond.
   • Once the Speed Splash is installed, peel back the release liner from the front face (the side where tiles will be applied).
   • Carefully align the tile into position and press gently onto the adhesive. Apply firm hand pressure (and/or use a hand roller) to assure full contact for a good bond.
   • Continue this process, removing the release liner from the front face as needed.
3. Grouting: Grout the completed tile installation on the same day of installation using a premixed or single-component grout, following the grout manufacturer’s instructions.

Shelf Life & Storage:

• Shelf life is a minimum of 2 years from the date of manufacture.
• Store in original, unopened packaging at room temperature (between 40∘F (4∘C) and 90∘F (32∘C)).
• Keep dry and out of direct sunlight.

Warranty: Speed Splash is warranted to be free of defects in manufacture for a period of 10 years. Protecto Wrap assumes no warranty as to the installation of its products.

Product Details:

• Brand: Protecto Wrap
• Product Name: Speed Splash Backsplash Adhesive Tile Mat
• Description: Primer-less Peel & Stick adhesive tile mat with adhesive on both sides.
• Color: Not specified, but likely translucent or off-white.
• Packaging:
  • 12 in. x 15 ft. Roll (15 sq ft per roll)
  • Roll Weight: 3.25 lbs. (1.47 kg)
  • 3 rolls/case
• Shelf Life: 2 years minimum
• Warranty: 10 Year Limited Warranty on manufacturing defects